Klipped Wing Chisel Plow Sweeps
Nichols Klipped Wing chisel plow sweeps are based on the same standards as the conventional chisel plow sweeps, but the wings are trimmed parallel to the direction the sweep is run, keeping the width consistent throughout the life of the sweep.
43° Klipped Wing Chisel Plow Sweeps
43° Stem Angle, 2" wide shank, 2-1/4" hole spacing for 1/2" plow bolts
1/4" Material
| Size | Part Number | Weight (lbs) |
| 16" | JH16K-2 | 4.25 |
| 18" | JH18K-2 | 4.8 |
45° Klipped Wing Chisel Plow Sweeps
45° Stem Angle, 2" wide shank, 2-1/2" hole spacing for 1/2" plow bolts
1/4" Material
| Size | Part Number | Weight (lbs) |
| 10" | IH10K | 6.0 |
| 12" | IH12K | 6.75 |
| 14" | IH14K | 7.25 |
| 16" | IH16K | 7.35 |
| 18" | IH18K | 8.25 |
47° Klipped Wing Chisel Plow Sweeps
47° Stem Angle, 2" wide shank, 2-1/4" hole spacing for 1/2" plow bolts
1/4" Material
| Size | Part Number | Weight (lbs) |
| 10" | 4710K-2 | 6.0 |
| 12" | 4712K-2 | 6.75 |
| 14" | 4714K-2 | 7.25 |
| 16" | 4716K-2 | 7.35 |
| 18 | 4718K-2 | 8.25 |
50° Klipped Wing Chisel Plow Sweeps
50° Stem Angle, 2" wide shank, 2-1/4" hole spacing for 1/2" plow bolts
1/4" Material
| Size | Crown | Part Number | Weight (lbs) |
| 10" | High | HC10BK-2 | 6.0 |
| 12" | High | HC12BK-2 | 6.75 |
| 14" | High | HC14BK-2 | 7.25 |
| 16" | Flat | HC16AAK-2 | 7.35 |
| 16" | Medium | HC16AK-2 | 7.35 |
| 16" | High | HC16BK-2 | 7.35 |
| 18" | Medium | HC18AK-2 | 8.25 |
| 18" | High | HC18BK-2 | 8.25 |
5/16" Material
| 10" | High | HC10BFK-2 | 7.25 |
| 12" | High | HC12BFK-2 | 8.5 |
| 14" | High | HC14BFK-2 | 9.5 |
| 16" | High | HC16BFK-2 | 9.75 |
| 18" | High | HC18BFK-2 | 10.5 |
