Low Crown Alabama Sweeps
Nichols low crown Alabama sweeps are used for breaking middles and ridges with their solid, sigle piece design. Available in two or three hole pattern.
Two 7/16" holes on a 2-1/4" center and an optional third 5/8" square hole in between
1/4" Material
| Size | Style | Part Number | Weight (lbs) |
| 10" | 2-Hole | AL10B2LO | 6.0 |
| 10" | 3-Hole | AL10B3LO | 6.0 |
| 12" | 2-Hole | AL12B2LO | 6.5 |
| 12" | 3-Hole | AL12B3LO | 6.5 |
| 14" | 2-Hole | AL14B2LO | 6.8 |
| 14" | 3-Hole | AL14B3LO | 6.8 |
| 16" | 2-Hole | AL16B2LO | 7.9 |
| 16" | 3-Hole | AL16B3LO | 7.9 |
| 18" | 2-Hole | AL18B2LO | 8.1 |
| 18" | 3-Hole | AL18B3LO | 8.1 |
| 20" | 2-Hole | AL20B2LO | 13.5 |
| 20" | 3-Hole | AL20B3LO | 13.5 |
| 22" | 2-Hole | AL22B2LO | 15.5 |
| 22" | 3-Hole | AL22B3LO | 15.5 |
| 24" | 2-Hole | AL24B2LO | 15.75 |
| 24" | 3-Hole | AL24B3LO | 15.75 |
High Crown Alabama Sweeps
Nichols high crown Alabama sweeps are based on the same design as the low crown only with an elevated ridge for increased soil disturbance. Available in two or three hole pattern.
Two 7/16" holes on a 2-1/4" center and an optional third 5/8" square hole in between
1/4" Material
| Size | Style | Part Number | Weight (lbs) |
| 10" | 2-Hole | AL10B2HI | 7.0 |
| 10" | 3-Hole | AL10B3HI | 7.0 |
| 12" | 2-Hole | AL12B2HI | 7.5 |
| 12" | 3-Hole | AL12B3HI | 7.5 |
| 14" | 2-Hole | AL14B2HI | 8.0 |
| 14" | 3-Hole | AL14B3HI | 8.0 |
| 16" | 2-Hole | AL16B2HI | 8.5 |
| 16" | 3-Hole | AL16B3HI | 8.5 |
| 18" | 2-Hole | AL18B2HI | 10.5 |
| 18" | 3-Hole | AL18B3HI | 10.5 |
| 20" | 2-Hole | AL20B2HI | 13.5 |
| 20" | 3-Hole | AL20B3HI | 13.5 |
| 22" | 2-Hole | AL22B2HI | 15.5 |
| 22" | 3-Hole | AL22B3HI | 15.5 |
| 24" | 2-Hole | AL24B2HI | 15.75 |
| 24" | 3-Hole | AL24B3HI | 15.75 |
Flat Back Alabama Sweeps
Nichols flat back Alabama sweeps features a high crown, seven hole pattern and are intended for use with wing extenders or "hungry boards". Each wing has two 3/8" holes for wing extenders.
Two center holes (3/4" top and 1/2" bottom) on 2-1/4" center with 5/8" peg located one inch below the lower (1/2") center hole, wings have two 3/8" holes for extenders
1/4" Material
| Size | Part Number | Weight (lbs) |
| 16" | AL16B7SB | 9.5 |
| 18" | AL18B7SB | 10.5 |
| 20" | AL20B7SB | 13.5 |
| 22" | AL22B7SB | 15.5 |
| 24" | AL24B7SB | 15.75 |
5/16" Material
| 16" | AL16F7SB | 11.0 |
| 18" | AL18F7SB | 12.9 |
| 20" | AL20F7SB | 16.5 |
| 22" | AL22F7SB | 18.5 |
| 24" | AL24F7SB | 19.5 |
