Double-End Chisel Points
Nichols double-end chisel points are our classic chisels. The #28 has been a favorite for years. Constructed of heat-treated steel, these chisels are made to last.
7/16" Holes
2-1/4" hole spacing
| Size | Material | Ends Style | Part Number | Weight (lbs) |
| 2" x 12-1/2" | 1/2" | diamond | S1215* | 4.3 |
| 2" x 15-1/2" | 5/8" | diamond | 1759D | 6.5 |
| 2" x 16" | 1/2" | swedged | HC2 | 4.4 |
| 2" x 16" | 5/8" | diamond | HC2C8-7 | 5.5 |
| 3" x 15" | 3/8" | swedged | 3H | 4.4 |
1/2" Holes
2-1/4" hole spacing
| Size | Material | Ends Style | Part Number | Weight (lbs) |
| 2" x 16" | 5/8" | diamond | HC2C8 | 5.5 |
| 2" x 16" | 5/8" | swedged | #28 | 5.3 |
2" x 16" | 5/8" | diamond | HC2C8SP | 5.5 |
| 2" x 16" | 3/4" | diamond | H342D | 6.7 |
| 4" x 15" | 3/8" | diamond | HC4-2 | 5.3 |
| 4" x 16" | 1/4" | flared | RA4 | 4.2 |
4" x 16" | 1/4" | flared | RA4S* | 4.2 |
| 4" x 16" | 5/16" | flared | RA5 | 5.7 |
4" x 16" | 5/16" | flared | RA5S* | 5.7 |
Heavy Forged Chisels
1/2" hex holes for 2" centers
| Size | Material | Ends Style | Part Number | Weight (lbs) |
| 2-1/8" x 18" | 1" | forged | H22-2 | 8.0 |
| 2-1/4" x 18" | 1-1/4" | forged | H23-2 | 13.0 |
Slash Points
Nichols slash points are based on our double-end chisels only with diagonally cut ends and are available hardfaced.
1/2" holes for 2-1/4" centers
1/2" Material
| Size | Style | Part Number | Weight (lbs) |
| 3" x 22" | right | SL123R | 9.6 |
| 3" x 22" | left | SL123L | 9.6 |
3" x 22" | hardfaced right | SL123RHF | 10.0 |
| 3" x 22" | hardfaced left | SL123LHF | 10.0 |
| 4" x 22" | right | SL124R | 12.6 |
| 4" x 22" | left | SL124L | 12.6 |
4" x 22" | hardfaced right | SL124RHF | 13.0 |
| 4" x 22" | hardfaced left | SL124LHF | 13.0 |
Twisted Chisels
Nichols twisted chisels have a slight helical twist but retain a direct point on the center of the piece. Also available hardfaced, they are offered in two material thicknesses.
1/2" holes for 2-1/4" centers
3/8" Material
| Size | Style | Part Number | Weight (lbs) |
| 3" x 22" | right | 383R-2 | 6.2 |
| 3" x 22" | left | 383L-2 | 6.2 |
3" x 22" | hardfaced right | 383R-2HF | 6.6 |
| 3" x 22" | hardfaced left | 383L-2HF | 6.6 |
1/2" Material
| 3" x 22" | right | 483R-2 | 8.1 |
3" x 22" | left | 483L-2 | 8.1 |
| 3" x 22" | hardfaced right | 483R-2HF | 8.5 |
| 3" x 22" | hardfaced left | 483L-2HF | 8.5 |
| 4" x 22" | right | 583R-2 | 10.4 |
| 4" x 22" | left | 583L-2 | 10.4 |
| 4" x 22" | hardfaced right | 583R-2HF | 10.8 |
| 4" x 22" | hardfaced left | 583L-2HF | 10.8 |
Chisels for Heel Sweeps
Chisels for the Nichols heel sweep are available in two sizes. Due to the combination of chiseling and sweeping causing greater draft, more power is required. To combat this, the narrow chisel is a sure bet.
| Size | Part Number | Weight (lbs) |
| Regular | H342CP | 5.2 |
| Narrow | H13CP | 6.0 |
