products

Conventional Chisel Plow Sweeps

Nichols conventional chisel plow sweeps have been designed with a large web and long nose for extra strength and lasting penetration. Each sweep is constructed of high-quality hardened steel which results in significantly better wear resistance. Available in four different stem angles and two material thicknesses.


43° Conventional Chisel Plow Sweeps
43° Stem Angle, 2" wide shank, 2-1/4" hole spacing for 1/2" plow bolts
1/4" Material
Size
Part Number
Weight (lbs)
10"
JH10-2
4.25
12"
JH12-2
4.8
14"
JH14-2
5.3
16"
JH16-2
6.0
18"
JH18-2
7.0
Will fit these machines: Ingham, some MF, Massey-Harris, Mel-Cam Cultiweeder, Minn-Toba 3pt hitch, Morris 200, '82 Magnum, Oliver 500, 3500, Wilrich (earlier models)


45° Conventional Chisel Plow Sweeps
45° Stem Angle, 2" wide shank, 2-1/2" hole spacing for 1/2" plow bolts
1/4" Material
Size
Part Number
Weight (lbs)
10"
IH10
4.25
12"
IH12
4.8
14"
IH14
5.3
16"
IH16
6.0
18"
IH18
7.0

5/16" Material
10"
IH10-F
5.1
12"
IH12-F
6.0
14"
IH14-F
6.6
16"
IH16-F
7.5
18"
IH18-F
8.8
Will fit these machines: CCIL, CO-OP, IH, IH Case


47° Conventional Chisel Plow Sweeps
47° Stem Angle, 2" wide shank, 2-1/4" hole spacing for 1/2" plow bolts
1/4" Material
Size
Part Number
Weight (lbs)
10"
4710-2
4.25
12"
4712-2
4.8
14"
4714-2
5.3
16"
4716-2
6.0
18"
4718-2
7.0
Will fit these machines: Krause (early low-clearance), Melroe-Clark


50° Conventional Chisel Plow Sweeps
50° Stem Angle, 2" wide shank, 2-1/4" hole spacing for 1/2" plow bolts
1/4" Material
Size
Crown
Part Number
Weight (lbs)
6"
High
HC6B-2
3.4
8"
High
HC8B-2
3.8
10"
High
HC10B-2
4.25
12"
High
HC12B-2
4.8
14"
High
HC14B-2
5.3
16"
Flat
HC16AA-2
6.0
16"
Medium
HC16A-2
6.0
16"
High
HC16B-2
6.0
18"
Flat
HC18AA-2
7.0
18"
Medium
HC18A-2
7.0
18"
High
HC18B-2
7.0
20"
Flat
HC20AA-2
7.56
20"
Medium
HC20A-2
7.56
22"
Medium
HC22A-2
7.70
24"
Meduim
HC24A-2
9.20

5/16" Material
6"
High
HC6BF-2
4.0
8"
High
HC8BF-2
4.3
10"
High
HC10BF-2
5.1
12"
High
HC12BF-2
6.0
14"
High
HC14BF-2
6.6
16"
Medium
HC16AF-2
7.5
16"
High

HC16BF-2
7.5
18"
Medium
HC18AF-2
8.8
18"
High
HC18BF-2
8.8
26"
Medium
HC26F-2
15.25
Will fit these machines: Bourgault (deep tillage), Case (later), Deere, Degelman, Fallow King, Fallow-Master, Flexi-Coil, Friggstad, Kewanee, Krause (low-clearance), Landol, Lely, Mel-Cam, MF 128, Minn-Toba 120, 176, Morris Magnum, Noble XR20, Oliver 247, 248, 347, Renn, Robin Nodwell, Roll-O-Flex, Sunflower, Versatile, Victory, White

Klipped Wing Chisel Plow Sweeps

Nichols Klipped Wing chisel plow sweeps are based on the same standards as the conventional chisel plow sweeps, but the wings are trimmed parallel to the direction the sweep is run, keeping the width consistent throughout the life of the sweep.


43° Klipped Wing Chisel Plow Sweeps
43° Stem Angle, 2" wide shank, 2-1/4" hole spacing for 1/2" plow bolts
1/4" Material
Size
Part Number
Weight (lbs)
16"
JH16K-2
4.25
18"
JH18K-2
4.8
Will fit these machines: Ingham, some MF, Massey-Harris, Mel-Cam Cultiweeder, Minn-Toba 3pt hitch, Morris 200, '82 Magnum, Oliver 500, 3500, Wilrich (earlier models)


45° Klipped Wing Chisel Plow Sweeps
45° Stem Angle, 2" wide shank, 2-1/2" hole spacing for 1/2" plow bolts
1/4" Material
Size
Part Number
Weight (lbs)
10"
IH10K
6.0
12"
IH12K
6.75
14"
IH14K
7.25
16"
IH16K
7.35
18"
IH18K
8.25
Will fit these machines: CCIL, CO-OP, IH, IH Case


47° Klipped Wing Chisel Plow Sweeps
47° Stem Angle, 2" wide shank, 2-1/4" hole spacing for 1/2" plow bolts
1/4" Material
Size
Part Number
Weight (lbs)
10"
4710K-2
6.0
12"
4712K-2
6.75
14"
4714K-2
7.25
16"
4716K-2
7.35
18
4718K-2
8.25
Will fit these machines: Krause (early low-clearance), Melroe-Clark


50° Klipped Wing Chisel Plow Sweeps
50° Stem Angle, 2" wide shank, 2-1/4" hole spacing for 1/2" plow bolts
1/4" Material
Size
Crown
Part Number
Weight (lbs)
10"
High
HC10BK-2
6.0
12"
High
HC12BK-2
6.75
14"
High
HC14BK-2
7.25
16"
Flat
HC16AAK-2
7.35
16"
Medium
HC16AK-2
7.35
16"
High
HC16BK-2
7.35
18"
Medium
HC18AK-2
8.25
18"
High
HC18BK-2
8.25

5/16" Material
10"
High
HC10BFK-2
7.25
12"
High
HC12BFK-2
8.5
14"
High
HC14BFK-2
9.5
16"
High
HC16BFK-2
9.75
18"
High
HC18BFK-2
10.5
Will fit these machines: Bourgault (deep tillage), Case (later), Deere, Degelman, Fallow King, Fallow-Master, Flexi-Coil, Friggstad, Kewanee, Krause (low-clearance), Landol, Lely, Mel-Cam, MF 128, Minn-Toba 120, 176, Morris Magnum, Noble XR20, Oliver 247, 248, 347, Renn, Robin Nodwell, Roll-O-Flex, Sunflower, Versatile, Victory, White

Ultrawing Chisel Plow Sweeps

Advancing ahead of its time, the Nichols Ultrawing chisel plow sweep surpasses any traditional chisel plow sweep in every aspect. From an optimal crown configuration to convex wing surfaces, the Ultrawing chisel plow sweep is highly regarded for its features, performance, durability, and quality.


43° Ultrawing Chisel Plow Sweeps - 2-1/4" Hole Spacing
43° Stem Angle, 2" wide shank, 2-1/4" hole spacing for 1/2" plow bolts
1/4" Material
Size
Crown
Part Number
Weight (lbs)
10"
Flat
AA4310-2
4.25
10"
High
B4310-2
4.25
12"
Flat
AA4312-2
4.8
12"
High
B4312-2
4.8
14"
Flat
AA4314-2
5.3
14"
High
B4314-2
5.3
16"
Flat
AA4316-2
6.0
16"
High
B4316-2
6.0
18"
Flat
AA4318-2
7.0
18"
High
B4318-2
7.0
5/16" Material
10"
High
B4310F-2
5.0
12"
High
B4312F-2
6.0
14"
High
B4314F-2
6.6
16"
High
B4316F-2
7.0
18"
High
B4318F-2
8.25
Will fit these machines: Ingham, some MF, Massey-Harris, Mel-Cam Cultiweeder, Minn-Toba 3-point hitch, Morris 220, '82 Magnum, Oliver 500, 3500, Wilrich (earlier models)


43° Ultrawing Chisel Plow Sweeps - 2-1/2" Hole Spacing
43° Stem Angle, 2" wide shank, 2-1/2" hole spacing for 1/2" plow bolts
1/4" Material
Size
Crown
Part Number
Weight (lbs)
12"
High
B4312H-2
4.8
14"
High
B4314H-2
5.3
16"
High
B4316H-2
6.0
18"
High
B4318H-2
7.0

5/16" Material
12"
High
B4312FH-2
6.0
14"
High
B4314FH-2
6.6
16"
High
B4316FH-2
7.5
18"
High
B4318FH-2
8.25
Will fit these machines: CCIL, CO-OP, IH, IH Case


47° Ultrawing Chisel Plow Sweeps
47° Stem Angle, 2" wide shank, 2-1/4" hole spacing for 1/2" plow bolts
1/4" Material
Size
Crown
Part Number
Weight (lbs)
10"
High
B4710-2
4.25
12"
Flat
AA4712-2
4.8
12"
High
B4712-2
4.8
14"
Flat
AA4714-2
5.3
14"
High
B4714-2
5.3
16"
Flat
AA4716-2
6.0
16"
High
B4716-2
6.0
18"
Flat
AA4718-2
7.0
18"
High
B4718-2
7.0

5/16" Material
10"
High
B4710F-2
5.0
12"
Flat
AA4712F-2
6.0
12"
High
B4712F-2
6.0
14"
Flat
AA4714F-2
6.6
14"
High
B4714F-2
6.6
16"
Flat
AA4716F-2
7.5
16"
High
B4716F-2
7.5
18"
Flat
AA4718F-2
8.25
18"
High
B4718F-2
8.25
Will fit these machines: Glencoe, Krause (early low-clearance), Melroe-Clark


50° Ultrawing Chisel Plow Sweeps
50° Stem Angle, 2" wide shank, 2-1/4" hole spacing for 1/2" plow bolts
1/4" Material
Size
Crown
Part Number
Weight (lbs)
10"
Flat
AA5010-2
4.25
12"
Flat
AA5012-2
4.8
12"
High
B5012-2
4.8
14"
Flat
AA5014-2
5.3
14"
High
B5014-2
5.3
16"
Flat
AA5016-2
6.0
16"
High
B5016-2
6.0
18"
Flat
AA5018-2
7.0
18"
High
B5018-2
7.0

1/4" Material - Large Pattern
20"
High
B5020-2
7.7
22"
High
B5022-2
8.4
24"
High
B5024-2
9.0
5/16" Material
8"
High
B5008F-2
5.2
12"
Flat
AA5012F-2
6.0
12"
High
B5012F-2
6.0
14"
Flat
AA5014F-2
6.6
14"
High
B5014F-2
6.6
16"
Flat
AA5016F-2
7.5
16"
High

B5016F-2
7.5
18"
High
B5018F-2
8.25
5/16" Material - Large Pattern
26"
High
B5026F-2
15.5
Will fit these machines: Bourgault (deep tillage), Case (later), Deere, Degelman, Fallow King, Fallow-Master, Flexi-Coil, Friggstad, Kewanee, Krause (low-clearance), Landol, Lely, Mel-Cam, MF 128, Minn-Toba 120, 176, Morris Magnum, Noble XR20, Oliver 247, 248, 347, Renn, Robin Nodwell, Roll-O-Flex, Sunflower, Versatile, Victory, White

Quick Change Chisel Plow Sweeps


Conventional Wing


Identical to our other conventional sweeps, these are exclusively for the Nichols Quick Change system.


High Crown
1/4" Material
Size
Part Number
Weight (lbs)
10"
HQC10B
5.4
12"
HQC12B
5.5
14"
HQC14B
6.3
16"
HQC16B
6.6
18"
HQC18B
7.4


5/16" Material
16"
HQC16BF
7.2
18"
HQC18BF
7.8


Low Crown

1/4" Material
Size
Part Number
Weight (lbs)
16"
HQC16AA
7.2
18"
HQC18AA
8.2



Klipped Wing


The Nichols Klipped Wing design ensures a consistent sweep width throughout the life of the piece. Great for heavy applications.


High Crown
1/4" Material
Size
Part Number
Weight (lbs)
6"
HQC6BK
3.5
8"
HQC8BK
4.0
10"
HQC10BK
6.2
12"
HQC12BK
6.6
14"
HQC14BK
7.0
16"
HQC16BK
7.2
18"
HQC18BK
8.2


5/16" Material
6"
HQC6BKF
4.0
8"
HQC8BKF
4.3
14"
HQC14BKF
7.4
16"
HQC16BKF
8.0
18"
HQC18BKF
8.6


Low Crown

1/4" Material
Size
Part Number
Weight (lbs)
16"
HQC16AAK
7.2
18"
HQC18AAK
8.2



Ultrawing


Advancing ahead of its time, the Nichols Ultrawing sweep surpasses any traditional design in every aspect. From an optimal crown configuration to convex wing surfaces, the Ultrawing sweep is highly regarded for its features, performance, durability, and quality.


High Crown
1/4" Material
Size
Part Number
Weight (lbs)
10"
BQC10B
5.3
12"
BQC12B
5.8
14"
BQC14B
6.4
16"
BQC16B
7.0
18"
BQC18B
7.4


5/16" Material
12"
BQC12F
7.2
14"
BQC14F
7.8
16"
BQC16F
8.4
18"
BQC18F
9.0


Low Crown

1/4" Material
Size
Part Number
Weight (lbs)
12"
AAQC12B
5.8
14"
AAQC14B
6.4
16"
AAQC16B
7.0
18"
AAQC18B
7.5


5/16" Material
12"
AAQC12F
7.2
14"
AAQC14F
7.8
16"
AAQC16F
8.4
18"
AAQC18F
9.0


Heel Sweeps

The Nichols heel sweep is a revolutionary design that allows both sweeping and chiseling to be done simultaneously. This combination results in breaking up the hardpan to encourage better root penetration and absorbtion of moisture.



Size
Part Number
Weight (lbs)
16"
HS16B
6.5
18"
HS18B
7.5

Hardfaced Top
16"
HS16HFT
7.0
18"
HS18HFT
8.0
Hardfaced Bottom
16"
HS16HFB
7.0
18"
HS18HFB
8.0
Be sure to follow the instructions for proper mounting of the Nichols heel sweep

Product Categories    

Category Models    

 

 

 
dealers contact home