products

The Nichols Ultrawing

The Ultrawing sweep, exclusively from Nichols, is the highest-qualtiy, longest-lasting, and best-performing sweep on the market. With a longer nose, curved convex wings, and an optimal crown configuration, the sweep anticipates wear. The unique, patented Ultrawing design maintains the sweep's shape over time, resulting in a significantly longer life of the piece.



Nose
The nose of the Ultrawing is elongated for better penetration, and to also ensure the tip stays sharp for as long as the sweep is used. With standard sweeps, there is a tendency for the nose to demonstrate a rounded effect during wear, which decreases the penetrating effect of the sweep because the rounded nose presents a blunt, frontal edge. This results in more drag and less penetration. Thanks to the optimal crown configuration with the Ultrawing sweep, this issue will never present itself.


Crown
The Ultrawing's optimal crown configuration is an important factor in the sweep's design that assists in maintaining the original shape of the piece's entire edge throughout the life of the sweep. With standard conventional sweeps, whose crown cross-section resembles that of an 'A', the sweep is soon worn down to a dull, rounded piece of steel. In the case of the elevated ridge, there is an appearance of a sharper nose on the sweep when viewed from above. Observation from the side, however, reveals that the nose is actually above the sweep's wings and provides little penetrating ability. There have even been instances in which this elevated ridge has worn in such a way as to leave a 'double nose', which acts as a catcher of residue that causes a ball-up of trash. Once again, something the Ultrawing sweep is designed to never do.


Wings
The curved wings of the Ultrawing sweep converge at the crown at an optimum angle, elevating the crown for the most efficient wear. Acting like an old scythe, the curvature of the wings provide extra weed killing ability by preventing the weeds from sliding off the ends of the sweep, which is often the case with a standard conventional sweep, leaving partially severed roots. In addition to the wings being curved, they also have a convex surface, which turns the sweep's leading edge downward to provide an increased angle of presentation to the soil. The convex surface also results in a stiffening effect to the wings, in addition to passing soil smoothly over the convex surface without excessively lifting the soil. For even more strength, the neck of the Ultrawing of the sweep where the stem and wings intersect. This crimped area also helps separate the soil away from the bolt heads.

All of these features combined are what sets the Ultrawing sweep apart from any other sweep on the international market. By the time the sweep is ready to retire, the shape is identical to that of a new, unused standard conventional sweep. Only from Nichols, the patented Ultrawing sweep is available for a multitude of applications in several different sizes.




"Ultrawing" is a copywritten trademark owned by Nichols Tillage Tools, Inc.
The Ultrawing sweep design is patented:
US Patent 4,787,462 - Canadian Patent 1,334,352 - Australian Patent 587,735



Ultrawing Chisel Plow Sweeps

Advancing ahead of its time, the Nichols Ultrawing chisel plow sweep surpasses any traditional chisel plow sweep in every aspect. From an optimal crown configuration to convex wing surfaces, the Ultrawing chisel plow sweep is highly regarded for its features, performance, durability, and quality.


43° Ultrawing Chisel Plow Sweeps - 2-1/4" Hole Spacing
43° Stem Angle, 2" wide shank, 2-1/4" hole spacing for 1/2" plow bolts
1/4" Material
Size
Crown
Part Number
Weight (lbs)
10"
Flat
AA4310-2
4.25
10"
High
B4310-2
4.25
12"
Flat
AA4312-2
4.8
12"
High
B4312-2
4.8
14"
Flat
AA4314-2
5.3
14"
High
B4314-2
5.3
16"
Flat
AA4316-2
6.0
16"
High
B4316-2
6.0
18"
Flat
AA4318-2
7.0
18"
High
B4318-2
7.0
5/16" Material
10"
High
B4310F-2
5.0
12"
High
B4312F-2
6.0
14"
High
B4314F-2
6.6
16"
High
B4316F-2
7.0
18"
High
B4318F-2
8.25


43° Ultrawing Chisel Plow Sweeps - 2-1/2" Hole Spacing
43° Stem Angle, 2" wide shank, 2-1/2" hole spacing for 1/2" plow bolts
1/4" Material
Size
Crown
Part Number
Weight (lbs)
12"
High
B4312H-2
4.8
14"
High
B4314H-2
5.3
16"
High
B4316H-2
6.0
18"
High
B4318H-2
7.0

5/16" Material
12"
High
B4312FH-2
6.0
14"
High
B4314FH-2
6.6
16"
High
B4316FH-2
7.5
18"
High
B4318FH-2
8.25


47° Ultrawing Chisel Plow Sweeps
47° Stem Angle, 2" wide shank, 2-1/4" hole spacing for 1/2" plow bolts
1/4" Material
Size
Crown
Part Number
Weight (lbs)
10"
High
B4710-2
4.25
12"
Flat
AA4712-2
4.8
12"
High
B4712-2
4.8
14"
Flat
AA4714-2
5.3
14"
High
B4714-2
5.3
16"
Flat
AA4716-2
6.0
16"
High
B4716-2
6.0
18"
Flat
AA4718-2
7.0
18"
High
B4718-2
7.0

5/16" Material
10"
High
B4710F-2
5.0
12"
Flat
AA4712F-2
6.0
12"
High
B4712F-2
6.0
14"
Flat
AA4714F-2
6.6
14"
High
B4714F-2
6.6
16"
Flat
AA4716F-2
7.5
16"
High
B4716F-2
7.5
18"
Flat
AA4718F-2
8.25
18"
High
B4718F-2
8.25


50° Ultrawing Chisel Plow Sweeps
50° Stem Angle, 2" wide shank, 2-1/4" hole spacing for 1/2" plow bolts
1/4" Material
Size
Crown
Part Number
Weight (lbs)
10"
Flat
AA5010-2
4.25
12"
Flat
AA5012-2
4.8
12"
High
B5012-2
4.8
14"
Flat
AA5014-2
5.3
14"
High
B5014-2
5.3
16"
Flat
AA5016-2
6.0
16"
High
B5016-2
6.0
18"
Flat
AA5018-2
7.0
18"
High
B5018-2
7.0

1/4" Material - Large Pattern
20"
High
B5020-2
7.7
22"
High
B5022-2
8.4
24"
High
B5024-2
9.0
5/16" Material
8"
High
B5008F-2
5.2
12"
Flat
AA5012F-2
6.0
12"
High
B5012F-2
6.0
14"
Flat
AA5014F-2
6.6
14"
High
B5014F-2
6.6
16"
Flat
AA5016F-2
7.5
16"
High

B5016F-2

7.5
18"
High
B5018F-2
8.25
5/16" Material - Large Pattern
26"
High
B5026F-2
15.5

Ultrawing Quick Change Chisel Plow Sweeps

Advancing ahead of its time, the Nichols Ultrawing sweep surpasses any traditional design in every aspect. From an optimal crown configuration to convex wing surfaces, the Ultrawing sweep is highly regarded for its features, performance, durability, and quality.


High Crown
1/4" Material
Size
Part Number
Weight (lbs)
10"
BQC10B
5.3
12"
BQC12B
5.8
14"
BQC14B
6.4
16"
BQC16B
7.0
18"
BQC18B
7.4


5/16" Material
12"
BQC12F
7.2
14"
BQC14F
7.8
16"
BQC16F
8.4
18"
BQC18F
9.0


Low Crown

1/4" Material
Size
Part Number
Weight (lbs)
12"
AAQC12B
5.8
14"
AAQC14B
6.4
16"
AAQC16B
7.0
18"
AAQC18B
7.5


5/16" Material
12"
AAQC12F
7.2
14"
AAQC14F
7.8
16"
AAQC16F
8.4
18"
AAQC18F
9.0



Ultrawing Field Cultivator Sweeps

Advancing ahead of its time, the Nichols Ultrawing field cultivator sweep surpasses any traditional sweep in every aspect. From an optimal crown configuration to convex wing surfaces, the Ultrawing sweep is highly regarded for its features, performance, durability, and quality.


41° Ultrawing Field Cultivator Sweeps
41° Stem Angle, 3/8" or 7/16" holes for both 1-5/8" and 1-3/4" centers
3/8" Holes
Size
Material
Part Number
Weight (lbs)
6"
1/4"
41UW6B3
2.7
7"
1/4"
41UW7B3
2.8
8"
1/4"
41UW8B3
2.85
9"
1/4"
41UW9B3
3.1
10"
1/4"
41UW10B3
3.4
7/16" Holes
6"
1/4"
41UW6B7
2.7
7"
1/4"
41UW7B7
2.8
8"
1/4"
41UW8B7
2.85
9"
1/4"
41UW9B7
3.1
10"
1/4"
41UW10B7
3.4


43° Ultrawing Field Cultivator Sweeps
43° Stem Angle, 3/8" or 7/16" holes for both 1-5/8" and 1-3/4" centers
3/8" Holes
Size
Material
Part Number
Weight (lbs)
7"
1/4"
43UW7B3
2.8
9"
1/4"
43UW9B3
3.1
10"
1/4"
43UW10B3
3.4
11"
1/4"
43UW11B3
3.5

7/16" Holes
7"
1/4"
43UW7B7
2.8
9"
1/4"
43UW9B7
3.1
10"
1/4"
43UW10B7
3.4
11"
1/4"
43UW11B7
3.5


47° Ultrawing Field Cultivator Sweeps
47° Stem Angle, 3/8", 7/16", or 1/2" holes for both 1-5/8" and 1-3/4" centers
3/8" Holes
Size
Material
Part Number
Weight (lbs)
6"
1/4"
47UW6B3
2.7
7"
1/4"
47UW7B3
2.8
8"
1/4"
47UW8B3
2.85
9"
1/4"
47UW9B3
3.1
10"
1/4"
47UW10B3
3.4
11"
1/4"
47UW11B3
3.5
12"
1/4"
47UW12B3
3.7

7/16" Holes
6"
1/4"
47UW6B7
2.7
7"
1/4"
47UW7B7
2.8
8"
1/4"
47UW8B7
2.85
9"
1/4"
47UW9B7
3.1
9"
5/16"
47UW9F7
4.0
10"
1/4"
47UW10B7
3.4
10"
5/16"
47UW10F7
4.25
11"
1/4"
47UW11B7
3.5
11"
5/16"
47UW11F7
4.5
12"
1/4"
47UW12B7
3.7
12"
5/16"
47UW12F7
4.75
1/2" Holes
9"
5/16"
47UW9F2
4.0
10"
1/4"
47UW10B2
3.4
10"
5/16"
47UW10F2
4.25
11"
1/4"
47UW11B2
3.5
11"
5/16"
47UW11F2
4.5
12"
1/4"
47UW12B2
3.7
12"
5/16"
4712F2
4.75


52° Ultrawing Field Cultivator Sweeps
52° Stem Angle, 7/16" holes for 2" centers
7/16" Holes
Size
Material
Part Number
Weight (lbs)
6"
1/4"
52UW6B7
2.7
7"
1/4"
52UW7B7
2.8
8"
1/4"
52UW8B7
2.85
9"
1/4"
52UW9B7
3.1
10"
1/4"
52UW10B7
3.4


Ultrawing Quick Change Field Cultivator Sweeps

Advancing ahead of its time, the Nichols Ultrawing sweep surpasses any traditional design in every aspect. From an optimal crown configuration to convex wing surfaces, the Ultrawing sweep is highly regarded for its features, performance, durability, and quality.


1/4" Material
Size
Part Number
Weight (lbs)
6"
UWQC6B
2.7
7"
UWQC7B
2.9
8"
UWQC8B
3.2
9"
UWQC9B
3.4
10"
UWQC10B
3.5
11"
UWQC11B
3.7
12"
UWQC12B
3.8


5/16" Material
6"
UWQC6F
3.6
7"
UWQC7F
3.8
8"
UWQC8F
4.0
9"
UWQC9F
4.3
10"
UWQC10F
4.5
11"
UWQC11F
4.5
12"
UWQC12F
5.0




 

 

 

dealers contact home